DIGGA AUGER DRIVE PD18 FOR EXCAVATORS 10T 20T

Digga's PD12 to PD25 range of drilling auger drives are ideally suited for 10 to 20t excavators with a flow between 70 to 230 lpm.
Fitted with Digga / Eaton bell motors they are integrated with a pressure relief valve and input housing.
The innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions, eliminating downtime and minimises maintenance, optimising your returns.
Digga planetary auger drilling drives are specially designed for drilling and augering in most ground conditions.

• Compact high torque Digga manufactured gearbox
• Highly efficient design with less moving parts
• Fitted with Eaton/Digga geroler hydraulic motor
• No case drain required
• Full range of shafts available upon request
• Extreme duty shaft locking system
• Drive fits down the hole for greater digging depth
• Low maintenance with 5yr gearbox and 3yr motor warranty

SPECIFICATION
Rec Flow Range: 70-230 lpm
Nominal Torque: 17600 Nm
Pressure Valve Fitted: Included
Max Pressure: Do not exceed 240 bar @ 140 lpm
Max Flow: Do not exceed 230 lpm @ 140 bar
Max Power: Do not exceed 60 kW (80 hp)
Overall Length: 1006 mm
Diameter: 290 mm
Weight (no frame / hitch): 176 Kg
Std Output Shaft: 75 mm Square
Swing Control: Optional
Diggalign: Optional
Rec Auger: A8 / A9
Max Auger Dia Clay / Shale: 1500 mm
Max Auger Dia Earth: 1600 mm