SEPPI SMWA MULTIPLA
Features
| Title | SEPPI SMWA MULTIPLA |
| Make | SEPPI |
| Sale Price | POA |
| Listing Type | New |
| Stock Number | S158 |
| RefCode | TA546361 |
Description
SMWA multipla
flail mulcher for large areas
100-155 HP*
Clear large areas easily :
up to 5 meters [200"] in one pass!
Combined mulchers reach working widths of as much as 5 m [200"]. This is ideal for large areas such as parks, airports, or uncultivated land. Three independent mulchers, trailed on a chassis, perfectly follow the contours of the ground. The width and the strength of these large mulchers make it possible to mulch at a high speed, while leaving a clean result.
The SMWA multipla comes with adjustable height control, even while the machine is working. All the settings are adjustable by remote control.
Combined machines like the SMWA multipla are made of 3 single units, liftable for transport and parking. With the STOPSAFE (TM) system it is possible to work with one or both wing units lifted, e.g. when working on narrow areas. The central mulcher has a 3-point linkage and can be used independently.
STANDARD VERSION
mulches grass and prunings up to 5 cm [2"] Ø
working speed 3-5 km/h
composition of the machine:
cart with one central machine and
two on the sides central machine,
for independant use with: SMWA rev cf
1000 rpm trasmission
input shaft 1 3/8" Z=6
number belts: 3 x 4
adjustable rear hood
functions of the hydraulic system with
solenoid valves and remote control:
(1) lifting the central, left and right machine
(2) adjusting the height of cut
required hydraulic connections: 1 double acting
front protection with metal flaps (181) or rubber flap (025)
rear protection: rubber flap
standard flails: SMW (OPT 039)
OPTIONS
PTO shaft (for 1 3/8" Z=6)
STOPSAFE (TM) automatic clutch to stop the rotor
when one mower is lifted from the ground chevrons for transportation on public roads
flail mulcher for large areas
100-155 HP*
Clear large areas easily :
up to 5 meters [200"] in one pass!
Combined mulchers reach working widths of as much as 5 m [200"]. This is ideal for large areas such as parks, airports, or uncultivated land. Three independent mulchers, trailed on a chassis, perfectly follow the contours of the ground. The width and the strength of these large mulchers make it possible to mulch at a high speed, while leaving a clean result.
The SMWA multipla comes with adjustable height control, even while the machine is working. All the settings are adjustable by remote control.
Combined machines like the SMWA multipla are made of 3 single units, liftable for transport and parking. With the STOPSAFE (TM) system it is possible to work with one or both wing units lifted, e.g. when working on narrow areas. The central mulcher has a 3-point linkage and can be used independently.
STANDARD VERSION
mulches grass and prunings up to 5 cm [2"] Ø
working speed 3-5 km/h
composition of the machine:
cart with one central machine and
two on the sides central machine,
for independant use with: SMWA rev cf
1000 rpm trasmission
input shaft 1 3/8" Z=6
number belts: 3 x 4
adjustable rear hood
functions of the hydraulic system with
solenoid valves and remote control:
(1) lifting the central, left and right machine
(2) adjusting the height of cut
required hydraulic connections: 1 double acting
front protection with metal flaps (181) or rubber flap (025)
rear protection: rubber flap
standard flails: SMW (OPT 039)
OPTIONS
PTO shaft (for 1 3/8" Z=6)
STOPSAFE (TM) automatic clutch to stop the rotor
when one mower is lifted from the ground chevrons for transportation on public roads
- the indicated HP refer to the input power required by the input shaft of the prime mover
