Earthmovers

Price Range
Recently Listed
Seller Location
Radius (km)

Listing Type:

Year
-
Find Dealers
Seller Location
Radius (km)
Dealer Name or Keywords

Kanga Slashers For Sale

Trade Safely. Use our anti-scam guide to protect yourself.

17 result(s)
Sort by

show

results

  • RefCode: TA807037
  • Cutting Width - mm: 1,500
  • Tractor Connection: Trailed

FEATURES Deck Material: Fully welded 3mm top, 6mm side walls Deck Profile: Formed, 'clean top' design, rounded back Deck Reinforcing: 25x12mm full sub-frame Gearbox: 40HP (540rpm) 1:1.93 ratio with 6 spline input shaft PTO Shaft: Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever release Clutch: 150mm (6) 2 plate safety clutch Finish: Deck, hot dipped galvanized Other Parts: Powder coated Tower: Multi-mount, 75x12mm, double clevis, floating Tower Offset: Positive locking multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 10mm T80 rated chain (max. load 3000kg) Skids: Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar: 100mm bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 1 and 2 lower linkage, category 1 pins and clips Front and Rear Chains: 6mm front and rear safety chains with wire rope replacement system Specifications - KSSR150 Cutting Width: 1500mm / 4' 11" Overall Width: 1710mm / 5' 8" Weight (kg): 300 Tip Speed (ft/min): 16,399 Optional Extras S Range rotary cutter single depth wheel (weighs 56kg) (32200): $450 Stepped slasher blades (pair): $50 Round back rotary cutter bolt kit (set of nuts, bolts and bushes): $22 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008: $45 Contact Farm Supplies today for more information!...

CALL 07 3085 2777
  • RefCode: TA807033
  • Cutting Width - mm: 2,100
  • Tractor Connection: Trailed

FEATURES Deck Material: Fully welded 4mm top, 8mm side walls Deck Profile: Formed, clean top design, rounded back Deck Reinforcing: 32x12mm full sub-frame Gearbox: 75hp (540rpm) 1:1.93 (1500 and 1800mm) or 1:1.46 (2100mm) ratio with 6 spline input shaft PTO Shaft/Clutch: Integral, Series 6 (64hp/48kw), two plate clutch/shaft, patent lever release covers, triangular profi le drive tube Finish Deck, hot dipped galvanized. Other parts, powder coated Tower: Multi-mount, 75x16mm, double clevis, fl oating Tower Offset: Positive locking, multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 13mm T80 rated chain (max. load 4500kg) Skids: Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar: 100mm bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 1 and 2 lower linkage, category 2 pins and clips Front and Rear Chains: 8mm front and rear safety chains with wire rope replacement system Specifications - KSMR210 Cutting Width: 2100mm / 6' 11" Overall Width: 2310mm / 7' 7" Weight (kg): 530 Tip Speed (ft/min): 17,368 Optional Extras XH/H/M Range rotary cutter single depth wheel (weighs 67kg) (25600): $800 Stepped slasher blades (pair): $50 Round back rotary cutter bolt kit (set of nuts, bolts and bushes): $22 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008: $45 Contact Farm Supplies today for more information!...

CALL 07 3085 2777
  • RefCode: TA807660
  • Cutting Width - mm: 2,100
  • Tractor Connection: Linkage

Deck Material: Fully welded 5mm top, 10mm side walls Deck Profile: Formed, 'clean top' design, rounded back Deck Reinforcing: 32x16mm full sub-frame Gearbox: 130hp (540rpm) 1:1.92 (1800mm) or 1:1.467 (2100mm) ratio with 20 spline input shaft PTO Shaft/Clutch: Intergral, Series 8 (110hp/82kw), two plate clutch/shaft, patent lever release covers, greasable 'triangular' profile tube Finish: Deck: Hot dipped galvanized. Other parts: powder coated Tower: Multi-mount, 90x16mm, double clevis, fl oating Tower Offset: Positive locking, multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 13mm T80 rated chain (max. load 4500kg) Skids: Adjustable skid (65 - 145mm), 8mm wall, 16mm runner Cutter Bar: 130mm spring steel, bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 2 linkage, pins and clips Front and Rear Chains: 10mm front and rear safety chains with wire rope replacement system Specifications - KSHR210 Cutting Width: 2100mm / 6'11" Overall Width: 2334mm / 7'8" Weight (Kg): 705 Tip Speed (ft/min): 17368 Optional Extras XH/H/M Range rotary cutter single depth wheel (weighs 67kg) $800.00 (Inc. GST) Stepped slasher blades (pair) $50.00 (Inc. GST) Round back rotary cutter bolt kit (set of nuts, bolts and bushes) $22.00 (Inc. GST) Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008. $45.00 (Inc. GST) High tensile bisalloy four (4) blade disc rotor (suit 1800 H/XH cutters) (adds 140kg) $1,595.00 (Inc. GST) High tensile bisalloy four (4) blade disc rotor (suit 2100 H/XH cutters) (adds 200kg) $1,995.00 (Inc. GST) Upgrade H1800 Cutter Bar (XH Range) $330.00 (Inc. GST) Upgrade H2100 Cutter Bar (XH Range) $360.00 (Inc. GST) Upgrade to W2600 PTO Shaft (130hp/97kw) $825.00 (Inc. GST) Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: TA807658
  • Cutting Width - mm: 1,800
  • Tractor Connection: Linkage

A heavy duty, fully reinforced twin rotor cutter that is ideal for tough operating conditions like roadsides, contacting and general council work. This cutter comes with twin 360 spinning solid wheels and spring steel cutter bars. It can also be ordered as a twin side discharge machine for use in vineyards and orchards.* Deck Material: Fully welded 5mm top, 10mm side walls , heavy duty angle/flat bar Deck Profile: Folded, clean top design, reinforced linkage points Gearboxes: 1 x 90hp three-way & 2 x 75hp right angle gearboxes PTO Shaft: Series 6 (64hp/48kw), triangular tube, safety covers with patent lever release Clutch: 200mm (8), 2 plate safety clutch, built in free wheel Drive Line: Heavy duty spring cushion couplings Finish: Deck: hot dipped galvanized. Other parts: high quality equipment enamel Tower: Fully welded, reinforced 8mm plate tower/stays Skids: Adjustable skid (25-100mm), 6mm wall, 12mm runner Cutter Bar: Bolted spring steel, drive lugs Blades: Hardened, spring steel, stepped down, twisted left and right, hardened bush Linkage/Mounting: Double clevis, category 2 and 3, category 2 pins and clips Wheels: Solid rubber wheels on 360 turning fork assembly Discharge: Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to Twin Side Discharge Specifications - KMH075-1.8 Cutting Width: 1800mm / 5'-11" Overall Width: 1960mm / 6'-6" Tip Speed (ft/min): 15119 Optional Extras Convert machine to twin side discharge (for vineyards / orchards) $1,250.00 (Inc. GST) 75hp heavy duty front roller (each) $550.00 (Inc. GST) Single rear roller with manual adjustment (in lieu of dual wheels) $750.00 (Inc. GST) Single rear roller with hydraulic ram, hoses & fittings (in lieu of dual wheels) $1,100.00 (Inc. GST) Left hand (anti-clockwise) orchard/vineyard blade (price per blade) $25.00 (Inc. GST) Right hand (clockwise) orchard/vineyard blade (price per blade) $25.00 (Inc. GST) Blade bolt kit (set of two (2) nuts, bolts, bushes) $45.00 (Inc. GST) Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: TA809371
  • Cutting Width - mm: 1,350
  • Tractor Connection: Linkage

FEATURES Deck Material: Fully welded 3mm top, 6mm side walls Deck Profile: Formed, 'clean top' design, rounded back Deck Reinforcing: 25x12mm full sub-frame Gearbox: 40HP (540rpm) 1:1.93 ratio with 6 spline input shaft PTO Shaft: Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever release Clutch: 150mm (6) 2 plate safety clutch Finish: Deck, hot dipped galvanized Other Parts: Powder coated Tower: Multi-mount, 75x12mm, double clevis, floating Tower Offset: Positive locking multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 10mm T80 rated chain (max. load 3000kg) Skids: Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar: 100mm bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 1 and 2 lower linkage, category 1 pins and clips Front and Rear Chains: 6mm front and rear safety chains with wire rope replacement system Specifications - KSSR135 Cutting Width: 1350mm / 4'5" Overall Width: 1556mm / 5'1" Weight (kg): 280 Tip Speed (ft/min): 14,759 Optional Extras S Range rotary cutter single depth wheel (weighs 56kg) (32200): $450 Stepped slasher blades (pair): $50 Round back rotary cutter bolt kit (set of nuts, bolts and bushes): $22 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008: $45 Contact Farm Supplies today for more information!...

CALL 07 3085 2777
  • RefCode: TA805619
  • Cutting Width - mm: 1,000
  • Tractor Connection: Linkage

Deck Material: Fully welded 2.5mm top, 5mm side walls Deck Profile: Folded, clean top design, square back Deck Reinforcing: 25x8mm full sub-frame Gearbox: 50hp (540rpm) 1:2.83 ratio with 6 spline input shaft PTO Shaft: Series 4 (35hp/26kw), triangular profile tube, safety covers with patent lever release Clutch: 150mm (6) 2 plate safety clutch Finish: Powder coated baked enamel Tower: Multi-mount, 65x10mm, double clevis, fl oating Tower Offset: Positive locking, multi-mount (centre mount with 150mm (6) left or right offset) Tower Chain: 8mm T80 rated chain (max. load 2000kg) Skids: Adjustable skid (20-110mm), 6mm wall, 10mm runner Cutter Bar: 90mm bolt together, cuphead blade bolts Blades: 8mm stepped down, hardened carbon/chrome (spring steel), replaceable bush Linkage/Mounting: Double clevis, category 1 lower linkage, category 1 pins and clips Front and Rear Chains: 6mm front and rear safety chains with wire rope replacement system Specifications - KSMN100 Cutting Width: 1000mm 3'-4" Overall Width: 1175mm 3'-11" Weight (kg): 180 Tip Speed (ft/min): 16,803 Optional Extras Mini stepped slasher blades (pair): $33.00 Mini Range rotary cutter bolt kit (set of nuts, Plough bolts and bushes): $17.00 Mini slasher bolt kit (set of nuts, M16 bolts and bushes). Suit slashers Pre-2008: $25.00 Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: TA807661
  • Cutting Width - mm: 1,450
  • Tractor Connection: Linkage
  • Power Rating - Hp: 25

This light duty rotary cutter is suitable for smaller horse powered tractors. Its twin rotor design gives people the ability to cut a wider area than would be possible with a traditional unit. Three high speed gear boxes ensure blade tip speed and quality of cut is not compromised. This Twin Rotor Cutter can also be ordered as a twin side discharge machine for use in vineyards and orchards.* Deck Material: Fully welded 3mm top, 10mm side walls, heavy duty angle/flat bar Deck Profile: Folded, clean top design, reinforced linkage points Gearboxes: 1 x 50hp three-way & 2 x 50hp right angle gearboxes PTO Shaft: Series 6 (64hp/48kw), triangular tube, safety covers with patent lever release Clutch: 200mm (8), 2 plate safety clutch Drive Line: Direct drive splined shaft (except 1.8m (6-0) model which has nylon couplings) Finish: High build oxide primer, high quality equipment enamel top coat Tower: 65x12mm, fl oating, 10mm high tensile chain stays (max. load 3000kg) Skids: Adjustable skid (25-100mm), 6mm wall, 12mm runner Cutter Bar: Bolt together, drive lugs Blades: Hardened, carbon/chrome (spring steel), stepped down, hardened bush Linkage/Mounting: Double clevis, category 1 lower linkage, category 1 pins and clips Wheels: Solid rubber wheels on 360 turning fork assembly Discharge: Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to 'Twin Side Discharge' Specifications - KMH50-150 HP Requirement: 25-50 Cutting Width: 1450mm / 4'-9" Overall Width: 1620mm / 5'-4" Tip Speed (ft/min): 12463 Optional Extras Height adjustable rear roller (in lieu of dual wheels) $350.00 (Inc. GST) Convert machine to twin side discharge (for vineyards / orchards) $700.00 (Inc. GST) Mini stepped slasher blades (pair) $33.00 (Inc. GST) Mini slasher bolt kit (set of two (2) nuts, bolts, bushes) $25.00 (Inc. GST) Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: DIY746151
  • Cutting Width - mm: 1,800
  • Tractor Connection: Linkage
  • Power Rating - Hp: 150

Complete with hydraulic wheel kit. Slasher in excellent condition. Skids as new. Blades as new. Has only mowed grass. No damage to machine

CALL **** *** 177 Show number
  • RefCode: TA807662
  • Cutting Width - mm: 1,300
  • Power Rating - Hp: 20

This light duty rotary cutter is suitable for smaller horse powered tractors. Its twin rotor design gives people the ability to cut a wider area than would be possible with a traditional unit. Three high speed gear boxes ensure blade tip speed and quality of cut is not compromised. This Twin Rotor Cutter can also be ordered as a twin side discharge machine for use in vineyards and orchards.* Deck Material: Fully welded 3mm top, 10mm side walls, heavy duty angle/flat bar Deck Profile: Folded, clean top design, reinforced linkage points Gearboxes: 1 x 50hp three-way & 2 x 50hp right angle gearboxes PTO Shaft: Series 6 (64hp/48kw), triangular tube, safety covers with patent lever release Clutch: 200mm (8), 2 plate safety clutch Drive Line: Direct drive splined shaft (except 1.8m (6-0) model which has nylon couplings) Finish: High build oxide primer, high quality equipment enamel top coat Tower: 65x12mm, fl oating, 10mm high tensile chain stays (max. load 3000kg) Skids: Adjustable skid (25-100mm), 6mm wall, 12mm runner Cutter Bar: Bolt together, drive lugs Blades: Hardened, carbon/chrome (spring steel), stepped down, hardened bush Linkage/Mounting: Double clevis, category 1 lower linkage, category 1 pins and clips Wheels: Solid rubber wheels on 360 turning fork assembly Discharge: Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to 'Twin Side Discharge' Specifications - KMH50-135 HP Requirement: 20-50 Cutting Width: 1300mm / 4'-3" Overall Width: 1470mm / 4'-10" Tip Speed (ft/min): 11237 Optional Extras Height adjustable rear roller (in lieu of dual wheels) $350.00 (Inc. GST) Convert machine to twin side discharge (for vineyards / orchards) $700.00 (Inc. GST) Mini stepped slasher blades (pair) $33.00 (Inc. GST) Mini slasher bolt kit (set of two (2) nuts, bolts, bushes) $25.00 (Inc. GST) Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: TA807035
  • Cutting Width - mm: 1,500
  • Tractor Connection: Trailed

FEATURES Deck Material: Fully welded 4mm top, 8mm side walls Deck Profile: Formed, clean top design, rounded back Deck Reinforcing: 32x12mm full sub-frame Gearbox: 75hp (540rpm) 1:1.93 (1500 and 1800mm) or 1:1.46 (2100mm) ratio with 6 spline input shaft PTO Shaft/Clutch: Integral, Series 6 (64hp/48kw), two plate clutch/shaft, patent lever release covers, triangular profi le drive tube Finish Deck, hot dipped galvanized. Other parts, powder coated Tower: Multi-mount, 75x16mm, double clevis, fl oating Tower Offset: Positive locking, multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 13mm T80 rated chain (max. load 4500kg) Skids: Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar: 100mm bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 1 and 2 lower linkage, category 2 pins and clips Front and Rear Chains: 8mm front and rear safety chains with wire rope replacement system Specifications - KSMR150 Cutting Width: 1500mm / 4' 11" Overall Width: 1710mm / 5' 8" Weight (kg): 390 Tip Speed (ft/min): 16,399 Optional Extras XH/H/M Range rotary cutter single depth wheel (weighs 67kg) (25600): $800 Stepped slasher blades (pair): $50 Round back rotary cutter bolt kit (set of nuts, bolts and bushes): $22 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008: $45 Contact Farm Supplies today for more information!...

CALL 07 3085 2777
  • RefCode: TA807034
  • Cutting Width - mm: 1,800
  • Tractor Connection: Trailed

FEATURES Deck Material: Fully welded 4mm top, 8mm side walls Deck Profile: Formed, clean top design, rounded back Deck Reinforcing: 32x12mm full sub-frame Gearbox: 75hp (540rpm) 1:1.93 (1500 and 1800mm) or 1:1.46 (2100mm) ratio with 6 spline input shaft PTO Shaft/Clutch: Integral, Series 6 (64hp/48kw), two plate clutch/shaft, patent lever release covers, triangular profi le drive tube Finish Deck, hot dipped galvanized. Other parts, powder coated Tower: Multi-mount, 75x16mm, double clevis, fl oating Tower Offset: Positive locking, multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 13mm T80 rated chain (max. load 4500kg) Skids: Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar: 100mm bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 1 and 2 lower linkage, category 2 pins and clips Front and Rear Chains: 8mm front and rear safety chains with wire rope replacement system Specifications - KSMR180 Cutting Width: 1800mm / 5' 11" Overall Width: 2010mm / 6' 7" Weight (kg): 490 Tip Speed (ft/min): 19,557 Optional Extras XH/H/M Range rotary cutter single depth wheel (weighs 67kg) (25600): $800 Stepped slasher blades (pair): $50 Round back rotary cutter bolt kit (set of nuts, bolts and bushes): $22 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008: $45 Contact Farm Supplies today for more information!...

CALL 07 3085 2777
  • RefCode: TA807663
  • Cutting Width - mm: 1,800
  • Tractor Connection: Linkage

Deck Material: Fully welded 5mm top, 10mm side walls Deck Profile: Formed, 'clean top' design, rounded back Deck Reinforcing: 32x16mm full sub-frame Gearbox: 130hp (540rpm) 1:1.92 (1800mm) or 1:1.467 (2100mm) ratio with 20 spline input shaft PTO Shaft/Clutch: Intergral, Series 8 (110hp/82kw), two plate clutch/shaft, patent lever release covers, greasable 'triangular' profile tube Finish: Deck: Hot dipped galvanized. Other parts: powder coated Tower: Multi-mount, 90x16mm, double clevis, fl oating Tower Offset: Positive locking, multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 13mm T80 rated chain (max. load 4500kg) Skids: Adjustable skid (65 - 145mm), 8mm wall, 16mm runner Cutter Bar: 130mm spring steel, bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 2 linkage, pins and clips Front and Rear Chains: 10mm front and rear safety chains with wire rope replacement system Specifications - KSHR180 Cutting Width: 1800mm / 5-11 Overall Width: 2034mm / 6-8 Weight (Kg): 610 Tip Speed (ft/min): 19557 Optional Extras XH/H/M Range rotary cutter single depth wheel (weighs 67kg) $800.00 (Inc. GST) Stepped slasher blades (pair) $50.00 (Inc. GST) Round back rotary cutter bolt kit (set of nuts, bolts and bushes) $22.00 (Inc. GST) Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008. $45.00 (Inc. GST) High tensile bisalloy four (4) blade disc rotor (suit 1800 H/XH cutters) (adds 140kg) $1,595.00 (Inc. GST) High tensile bisalloy four (4) blade disc rotor (suit 2100 H/XH cutters) (adds 200kg) $1,995.00 (Inc. GST) Upgrade H1800 Cutter Bar (XH Range) $330.00 (Inc. GST) Upgrade H2100 Cutter Bar (XH Range) $360.00 (Inc. GST) Upgrade to W2600 PTO Shaft (130hp/97kw) $825.00 (Inc. GST) Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: TA807659
  • Cutting Width - mm: 1,750
  • Tractor Connection: Linkage
  • Power Rating - Hp: 30

This light duty rotary cutter is suitable for smaller horse powered tractors. Its twin rotor design gives people the ability to cut a wider area than would be possible with a traditional unit. Three high speed gear boxes ensure blade tip speed and quality of cut is not compromised. This Twin Rotor Cutter can also be ordered as a twin side discharge machine for use in vineyards and orchards.* Deck Material: Fully welded 3mm top, 10mm side walls, heavy duty angle/flat bar Deck Profile: Folded, clean top design, reinforced linkage points Gearboxes: 1 x 50hp three-way & 2 x 50hp right angle gearboxes PTO Shaft: Series 6 (64hp/48kw), triangular tube, safety covers with patent lever release Clutch: 200mm (8), 2 plate safety clutch Drive Line: Direct drive splined shaft (except 1.8m (6-0) model which has nylon couplings) Finish: High build oxide primer, high quality equipment enamel top coat Tower: 65x12mm, fl oating, 10mm high tensile chain stays (max. load 3000kg) Skids: Adjustable skid (25-100mm), 6mm wall, 12mm runner Cutter Bar: Bolt together, drive lugs Blades: Hardened, carbon/chrome (spring steel), stepped down, hardened bush Linkage/Mounting: Double clevis, category 1 lower linkage, category 1 pins and clips Wheels: Solid rubber wheels on 360 turning fork assembly Discharge: Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to 'Twin Side Discharge' Specifications - KMH50-180 HP Requirement: 30-50 Cutting Width: 1750mm / 5'-8" Overall Width: 1920mm 6'-4" Tip Speed (ft/min): 14733 Optional Extras Height adjustable rear roller (in lieu of dual wheels) $350.00 (Inc. GST) Convert machine to twin side discharge (for vineyards / orchards) $700.00 (Inc. GST) Mini stepped slasher blades (pair) $33.00 (Inc. GST) Mini slasher bolt kit (set of two (2) nuts, bolts, bushes) $25.00 (Inc. GST) Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: TA805616
  • Cutting Width - mm: 1,200
  • Tractor Connection: Linkage

Deck Material: Fully welded 2.5mm top, 5mm side walls Deck Profile: Folded, clean top design, square back Deck Reinforcing: 25x8mm full sub-frame Gearbox: 50hp (540rpm) 1:2.83 ratio with 6 spline input shaft PTO Shaft: Series 4 (35hp/26kw), triangular profile tube, safety covers with patent lever release Clutch: 150mm (6) 2 plate safety clutch Finish: Powder coated baked enamel Tower: Multi-mount, 65x10mm, double clevis, floating Tower Offset: Positive locking, multi-mount (centre mount with 150mm (6) left or right offset) Tower Chain: 8mm T80 rated chain (max. load 2000kg) Skids: Adjustable skid (20-110mm), 6mm wall, 10mm runner Cutter Bar: 90mm bolt together, cuphead blade bolts Blades: 8mm stepped down, hardened carbon/chrome (spring steel), replaceable bush Linkage/Mounting: Double clevis, category 1 lower linkage, category 1 pins and clips Front and Rear Chains: 6mm front and rear safety chains with wire rope replacement system Specifications - KSMN120 Cutting Width: 1200 3'-11" Overall Width: 1375mm 4'-6" Weight (kg): 205 Tip Speed (ft/min): 19,203 Optional Extras Mini stepped slasher blades (pair): $33.00 Mini Range rotary cutter bolt kit (set of nuts, Plough bolts and bushes): $17.00 Mini slasher bolt kit (set of nuts, M16 bolts and bushes). Suit slashers Pre-2008: $25.00 Contact Farm Supplies today for sales or more information!...

CALL 07 3085 2777
  • RefCode: TA807039
  • Cutting Width - mm: 1,200
  • Tractor Connection: Trailed

FEATURES Deck Material: Fully welded 3mm top, 6mm side walls Deck Profile: Formed, 'clean top' design, rounded back Deck Reinforcing: 25x12mm full sub-frame Gearbox: 40HP (540rpm) 1:1.93 ratio with 6 spline input shaft PTO Shaft: Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever release Clutch: 150mm (6) 2 plate safety clutch Finish: Deck, hot dipped galvanized Other Parts: Powder coated Tower: Multi-mount, 75x12mm, double clevis, floating Tower Offset: Positive locking multi-mount (centre mount with 200mm (8) left or right offset) Tower Chain: 10mm T80 rated chain (max. load 3000kg) Skids: Adjustable skid (35-125mm), 6mm wall, 12mm runner Cutter Bar: 100mm bolt together, drive lugs, counter sunk blade bolts Blades: Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bush Linkage/Mounting: Double clevis, category 1 and 2 lower linkage, category 1 pins and clips Front and Rear Chains: 6mm front and rear safety chains with wire rope replacement system Specifications - KSSR120 Cutting Width: 1200mm / 3' 11" Overall Width: 1410mm / 4' 8" Weight (kg): 250 Tip Speed (ft/min): 13,119 Optional Extras S Range rotary cutter single depth wheel (weighs 56kg) (32200): $450 Stepped slasher blades (pair): $50 Round back rotary cutter bolt kit (set of nuts, bolts and bushes): $22 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008: $45 Contact Farm Supplies today for more information!...

CALL 07 3085 2777
  • RefCode: TA627196
  • Tractor Connection: Linkage

Kanga 5' Slasher, H/D, centre mount, 3ptl * price includes gst John - 08 8323 8795 Richard - 0419 820318 wrightstractors@bigpond.com

CALL 08 7007 6847
17 result(s)
Sort by

show

results

The information contained within classified listings on TradeEarthmovers.com.au is generated by the private and dealer advertisers. Please confirm listing details including price and specifications directly with the seller.